LANCHEZ Pressure Washers
The hazard
The recalled pressure washers lack an integral ground-fault circuit-interrupter (GFCI) and an adequate-length power cord, which may encourage use of an extension cord, posing serious risks of injury or death from shock and electrocution hazards. Reported injuries: CPSC is aware of one report of a missing GFCI. No injuries have been reported.
The remedy
Consumers should stop using the recalled pressure washers immediately and contact LANCHEZ for a full refund. Consumers will be asked to unplug the pressure washer, destroy it by cutting the power cord in half and send a photo of the destroyed power washer, showing the model number, to service@lanchezpumps.com. Consumers should then dispose of the destroyed recalled product.
About this recall
This recall involves LANCHEZ-branded pressure washers. The recalled, 3.2 GPM electric pressure washers were sold in blue-and-black or red-and-black, and measure about 12.2 inches deep, 16.9 inches wide and 16.5 inches high. The pressure washers came with a 500 ml soap tank, four quick disconnect nozzles and a 23-foot hose. Only power washers without a GFCI or adequate-length power cord are included in this recall. “LANCHEZ” is printed on the front of the power washer and model number “KLC-BULL135C” is printed on a label on top of the unit near the handle.
Would you have heard about this one?
RapidRecall watches everything you own against every new federal recall and emails you the moment something you bought turns up. Free for your most important items.
Start monitoring freeSourced from the Consumer Product Safety Commission’s public recall data. Always verify serial and date ranges against the official notice before acting.